Price
Distribution, sale and use of Ukrainian software in the Russian Federation and Belarus is prohibited by the law of Ukraine.
MINI
BASE
€1 500 EUR
Allows to perform structural engineering analysis using the maximum of 5000 nodes and elements. It`s well-suited for local structural problems analysis, e.g. floor slabs, beams or columns analysis
€4 300 EUR
allows to perform structural engineering analysis without size (nodes and elements) limit.
up to 5000 nodes or elements
unlimited number of nodes and elements
allows you to purchase additional modules
- ✓Basic configuration4
Basic configuration4
Includes:
- graphical user interface;
- linear static analysis;
- dynamic analysis by eigenfrequencies expansion method (accelerogram, seismic by normative documents (38 modules) 1, harmonic, impulse, impact, wind pulsation, blast wave impact);
- calculation ofdesign combinations of forces (DCF)
- calculation of design combinations of loads (DCL)
- calculation of loads on fragment of the structure (FRAGMENT);
- strength of cross section test (LITERA);
- cross-section constructor (CSC);
- condensation of masses (mass redistribution into defined nodes of the design model);
- floor nodal reaction spectrums;
- editable rolled steel database;
- editable materials database (concrete, reinforcement, rolled steel, wood);
- documentation system;
- application programming interface(LiraAPI);
- Revit Structure ->LIRA 10-> Revit Structure;
- AutoCAD ->LIRA 10-> AutoCAD;
- Tekla Structure ->LIRA 10-> Tekla Structure;
- Advance Steel ->LIRA 10-> Advance Steel;
- Renga -> LIRA 10;
Application Utilities:
- seismogram by accelerogram;
- accelerogram by seismogram;
- unit converter;
- scientific calculator;
- interpolation of data;
- calculation of pile's stiffness;
- calculation of coefficients of subgrade reaction;
- wall thickness of glaze ice;
- local calculation of reinforced concrete bar;
- local calculation of reinforced concrete plate
- column's effective length;
- сalculation of steel deck;
- ✓Stability
Stability
Includes:
- calculation of safety factors and buckling modes of the structure.
- ✓Design system of reinforced concrete structures (RCS)
Design system of reinforced concrete structures (RCS)
Includes:
- checking and proportioning of reinforcement for RC elements;
- checking and proportioning of reinforcement for pipe-concrete elements;
- surface of bearing capacity;
- punching of reinforced concrete slabs.
- ✓Design system for steel structures (SS)
Design system for steel structures (SS)
Includes:
- checking and proportioning of steel elementcross-sections;
- calculation logging;
- checking of timber element cross-sections.
- ✓Timber
Timber
- ✓Basic configuration4
Basic configuration4
€2 000 EUR
Includes:
- graphical user interface;
- linear static analysis;
- dynamic analysis by eigenfrequencies expansion method (accelerogram, seismic by normative documents (38 modules) 1, harmonic, impulse, impact, wind pulsation, blast wave impact);
- calculation ofdesign combinations of forces (DCF)
- calculation of design combinations of loads (DCL)
- calculation of loads on fragment of the structure (FRAGMENT);
- strength of cross section test (LITERA);
- cross-section constructor (CSC);
- condensation of masses (mass redistribution into defined nodes of the design model);
- floor nodal reaction spectrums;
- editable rolled steel database;
- editable materials database (concrete, reinforcement, rolled steel, wood);
- documentation system;
- application programming interface(LiraAPI);
- Revit Structure ->LIRA 10-> Revit Structure;
- AutoCAD ->LIRA 10-> AutoCAD;
- Tekla Structure ->LIRA 10-> Tekla Structure;
- Advance Steel ->LIRA 10-> Advance Steel;
- Renga -> LIRA 10;
Application Utilities:
- seismogram by accelerogram;
- accelerogram by seismogram;
- unit converter;
- scientific calculator;
- interpolation of data;
- calculation of pile's stiffness;
- calculation of coefficients of subgrade reaction;
- wall thickness of glaze ice;
- local calculation of reinforced concrete bar;
- local calculation of reinforced concrete plate
- column's effective length;
- calculation of steel deck;
- local calculation of steel bar;
- punching.
- ✓Stability
Stability
€250 EUR
Includes:
- calculation of safety factors and buckling modes of the structure.
- ✓Design system of reinforced concrete structures (RCS)
Design system of reinforced concrete structures (RCS)
€600 EUR
Includes:
- checking and proportioning of reinforcement for RC elements;
- checking and proportioning of reinforcement for pipe-concrete elements;
- surface of bearing capacity;
- punching of reinforced concrete slabs.
- ✓Design system for steel structures (SS)
Design system for steel structures (SS)
€450 EUR
Includes:
- checking and proportioning of steel elementcross-sections;
- calculation logging;
- checking of timber element cross-sections.
- ✓Timber
Timber
€200 EUR
- ✓Soil
Soil
€800 EUR
Includes:
- determination of natural foundation stiffness;
- determination of pile foundation stiffness;
PROFF
FULL
€6 300 EUR
Configuration performs all the analysis that Standard version does but with geometrical and physical nonlinearity taken into account
€8 600 EUR
Includes a complete list of LIRA 10.16 functional capabilities
unlimited number of nodes and elements
allows you to purchase additional modules
unlimited number of nodes and elements
allows you to purchase additional modules
- ✓Basic configuration4
Basic configuration4
€2 000 EUR
Includes:
- graphical user interface;
- linear static analysis;
- dynamic analysis by eigenfrequencies expansion method (accelerogram, seismic by normative documents (38 modules) 1, harmonic, impulse, impact, wind pulsation, blast wave impact);
- calculation ofdesign combinations of forces (DCF)
- calculation of design combinations of loads (DCL)
- calculation of loads on fragment of the structure (FRAGMENT);
- strength of cross section test (LITERA);
- cross-section constructor (CSC);
- condensation of masses (mass redistribution into defined nodes of the design model);
- floor nodal reaction spectrums;
- editable rolled steel database;
- editable materials database (concrete, reinforcement, rolled steel, wood);
- documentation system;
- application programming interface(LiraAPI);
- Revit Structure ->LIRA 10-> Revit Structure;
- AutoCAD ->LIRA 10-> AutoCAD;
- Tekla Structure ->LIRA 10-> Tekla Structure;
- Advance Steel ->LIRA 10-> Advance Steel;
- Renga -> LIRA 10;
Application Utilities:
- seismogram by accelerogram;
- accelerogram by seismogram;
- unit converter;
- scientific calculator;
- interpolation of data;
- calculation of pile's stiffness;
- calculation of coefficients of subgrade reaction;
- wall thickness of glaze ice;
- local calculation of reinforced concrete bar;
- local calculation of reinforced concrete plate
- column's effective length;
- calculation of steel deck;
- ✓Stability
Stability
€250 EUR
Includes:
- calculation of safety factors and buckling modes of the structure.
- ✓Design system of reinforced concrete structures (RCS)
Design system of reinforced concrete structures (RCS)
€600 EUR
Includes:
- checking and proportioning of reinforcement for RC elements;
- checking and proportioning of reinforcement for pipe-concrete elements;
- surface of bearing capacity;
- punching of reinforced concrete slabs.
- ✓Design system for steel structures (SS)
Design system for steel structures (SS)
€450 EUR
Includes:
- checking and proportioning of steel elementcross-sections;
- calculation logging;
- checking of timber element cross-sections.
- ✓Timber
Timber
€200 EUR
- ✓Soil
Soil
€800 EUR
Includes:
- determination of natural foundation stiffness;
- determination of pile foundation stiffness;
- ✓Physical and design nonlinearity
Physical and design nonlinearity
€600 EUR
- ✓Geometrical nonlinearity
Geometrical nonlinearity
€600 EUR
- ✓Assemblage
Assemblage
€500 EUR
Includes:
- linear;
- nonlinear(elements of physical, structural and geometric nonlinearity);
- direct dynamic analysis2 of the assembled structure;
- ✓Variation of models
Variation of models
€300 EUR
Includes:
- unification of DCF problem package;
- formation of DCF and DCL by downloads of problem package;
- ✓Basic configuration4
Basic configuration4
€2 000 EUR
Includes:
- graphical user interface;
- linear static analysis;
- dynamic analysis by eigenfrequencies expansion method (accelerogram, seismic by normative documents (38 modules) 1, harmonic, impulse, impact, wind pulsation, blast wave impact);
- calculation ofdesign combinations of forces (DCF)
- calculation of design combinations of loads (DCL)
- calculation of loads on fragment of the structure (FRAGMENT);
- strength of cross section test (LITERA);
- cross-section constructor (CSC);
- condensation of masses (mass redistribution into defined nodes of the design model);
- floor nodal reaction spectrums;
- editable rolled steel database;
- editable materials database (concrete, reinforcement, rolled steel, wood);
- documentation system;
- application programming interface(LiraAPI);
- Revit Structure ->LIRA 10-> Revit Structure;
- AutoCAD ->LIRA 10-> AutoCAD;
- Tekla Structure ->LIRA 10-> Tekla Structure;
- Advance Steel ->LIRA 10-> Advance Steel;
- Renga -> LIRA 10;
Application Utilities:
- seismogram by accelerogram;
- accelerogram by seismogram;
- unit converter;
- scientific calculator;
- interpolation of data;
- calculation of pile's stiffness;
- calculation of coefficients of subgrade reaction;
- wall thickness of glaze ice;
- local calculation of reinforced concrete bar;
- local calculation of reinforced concrete plate
- column's effective length;
- сalculation of steel deck;
- ✓Stability
Stability
€250 EUR
Includes:
- calculation of safety factors and buckling modes of the structure.
- ✓Design system of reinforced concrete structures (RCS)
Design system of reinforced concrete structures (RCS)
€600 EUR
Includes:
- checking and proportioning of reinforcement for RC elements;
- checking and proportioning of reinforcement for pipe-concrete elements;
- surface of bearing capacity;
- punching of reinforced concrete slabs.
- ✓Design system for steel structures (SS)
Design system for steel structures (SS)
€450 EUR
Includes:
- checking and proportioning of steel elementcross-sections;
- calculation logging;
- checking of timber element cross-sections.
- ✓Timber
Timber
€200 EUR
- ✓Soil
Soil
€800 EUR
Includes:
- determination of natural foundation stiffness;
- determination of pile foundation stiffness;
- ✓Physical and design nonlinearity
Physical and design nonlinearity
€600 EUR
- ✓Geometrical nonlinearity
Geometrical nonlinearity
€600 EUR
- ✓Assemblage
Assemblage
€500 EUR
Includes:
- linear;
- nonlinear(elements of physical, structural and geometric nonlinearity);
- direct dynamic analysis2 of the assembled structure;
- ✓Variation of models
Variation of models
€300 EUR
Includes:
- unification of DCF problem package;
- formation of DCF and DCL by downloads of problem package;
- ✓Direct dynamic analysis (Dynamics+)
Direct dynamic analysis (Dynamics+)
€500 EUR
for action of accelerograms, seismograms and other dynamic loads for problems:
- linear;
- physically and structurally nonlinear problems
- geometrically nonlinear problems.
- ✓Bridge
Bridge
€400 EUR
Includes:
- influence surfaces;
- rolling bythe axes of the wheels;
- calculation of multistage schemes;
- ✓PushoverAnalysis (nonlinear quasi-static analysis of dynamic problems)3
PushoverAnalysis (nonlinear quasi-static analysis of dynamic problems)3
€400 EUR
Includes:
- by single-component accelerogram;
- DBN V.1.1-12:2014;
- STO NIU MGSU 2015;
- EN 1998-1:2004;
- ✓Thermal conductivity
Thermal conductivity
€400 EUR
Includes:
- stationary and non-stationary2 thermal conductivity problems (calculation of temperature distribution across structure);
- considering of the obtained temperature field in the stress-strain state;
- ✓Cross section calculation
Cross section calculation
€400 EUR
Includes:
- determination of elastic and geometric properties, plastic, torsion, shear, mass-inertial and stiffness characteristics.
- ✓Filtration3
Filtration3
€200 EUR
Includes:
- filtration modeling in water-saturated soil with calculation of distribution of fluid velocity and pressure;
- depression curve construction;
- considering of the obtained pore pressure in stress-strain state;
MINI
BASE
PROFF
FULL
€1 500 EUR
Allows to perform structural engineering analysis using the maximum of 5000 nodes and elements. It`s well-suited for local structural problems analysis, e.g. floor slabs, beams or columns analysis.
€4 300 EUR
Allows to perform structural engineering analysis without size (nodes and elements) limit
€6 300 EUR
Configuration performs all the analysis that Standard version does but with geometrical and physical nonlinearity taken into account
€8 600 EUR
Includes a complete list of LIRA 10.16 functional capabilities
up to 5000 nodes or elements
unlimited number of nodes and elements
allows you to purchase additional modules
unlimited number of nodes and elements
allows you to purchase additional modules
unlimited number of nodes and elements
allows you to purchase additional modules
- ✓Basic configuration4
Basic configuration4
Includes:
- graphical user interface;
- linear static analysis;
- dynamic analysis by eigenfrequencies expansion method (accelerogram, seismic by normative documents (38 modules) 1, harmonic, impulse, impact, wind pulsation, blast wave impact);
- calculation ofdesign combinations of forces (DCF)
- calculation of design combinations of loads (DCL)
- calculation of loads on fragment of the structure (FRAGMENT);
- strength of cross section test (LITERA);
- cross-section constructor (CSC);
- condensation of masses (mass redistribution into defined nodes of the design model);
- floor nodal reaction spectrums;
- editable rolled steel database;
- editable materials database (concrete, reinforcement, rolled steel, wood);
- documentation system;
- application programming interface(LiraAPI);
- Revit Structure ->LIRA 10-> Revit Structure;
- AutoCAD ->LIRA 10-> AutoCAD;
- Tekla Structure ->LIRA 10-> Tekla Structure;
- Advance Steel ->LIRA 10-> Advance Steel;
- Renga -> LIRA 10;
Application Utilities:
- seismogram by accelerogram;
- accelerogram by seismogram;
- unit converter;
- scientific calculator;
- interpolation of data;
- calculation of pile's stiffness;
- calculation of coefficients of subgrade reaction;
- wall thickness of glaze ice;
- local calculation of reinforced concrete bar;
- local calculation of reinforced concrete plate
- column's effective length;
- calculation of steel deck;
- ✓Stability
Stability
Includes:
- calculation of safety factors and buckling modes of the structure.
- ✓Design system of reinforced concrete structures (RCS)
Design system of reinforced concrete structures (RCS)
Includes:
- checking and proportioning of reinforcement for RC elements;
- checking and proportioning of reinforcement for pipe-concrete elements;
- surface of bearing capacity;
- punching of reinforced concrete slabs.
- ✓Design system for steel structures (SS)
Design system for steel structures (SS)
Includes:
- checking and proportioning of steel elementcross-sections;
- calculation logging;
- checking of timber element cross-sections.
- ✓Timber
Timber
- ✓Basic configuration4
Basic configuration4
€2 000 EUR
Includes:
- graphical user interface;
- linear static analysis;
- dynamic analysis by eigenfrequencies expansion method (accelerogram, seismic by normative documents (38 modules) 1, harmonic, impulse, impact, wind pulsation, blast wave impact);
- calculation ofdesign combinations of forces (DCF)
- calculation of design combinations of loads (DCL)
- calculation of loads on fragment of the structure (FRAGMENT);
- strength of cross section test (LITERA);
- cross-section constructor (CSC);
- condensation of masses (mass redistribution into defined nodes of the design model);
- floor nodal reaction spectrums;
- editable rolled steel database;
- editable materials database (concrete, reinforcement, rolled steel, wood);
- documentation system;
- application programming interface(LiraAPI);
- Revit Structure ->LIRA 10-> Revit Structure;
- AutoCAD ->LIRA 10-> AutoCAD;
- Tekla Structure ->LIRA 10-> Tekla Structure;
- Advance Steel ->LIRA 10-> Advance Steel;
- Renga -> LIRA 10;
Application Utilities:
- seismogram by accelerogram;
- accelerogram by seismogram;
- unit converter;
- scientific calculator;
- interpolation of data;
- calculation of pile's stiffness;
- calculation of coefficients of subgrade reaction;
- wall thickness of glaze ice;
- local calculation of reinforced concrete bar;
- local calculation of reinforced concrete plate
- column's effective length;
- сalculation of steel deck;
- ✓Stability
Stability
€250 EUR
Includes:
- calculation of safety factors and buckling modes of the structure.
- ✓Design system of reinforced concrete structures (RCS)
Design system of reinforced concrete structures (RCS)
€600 EUR
Includes:
- checking and proportioning of reinforcement for RC elements;
- checking and proportioning of reinforcement for pipe-concrete elements;
- surface of bearing capacity;
- punching of reinforced concrete slabs.
- ✓Design system for steel structures (SS)
Design system for steel structures (SS)
€450 EUR
Includes:
- checking and proportioning of steel elementcross-sections;
- calculation logging;
- checking of timber element cross-sections.
- ✓Timber
Timber
€200 EUR
- ✓Soil
Soil
€800 EUR
Includes:
- determination of natural foundation stiffness;
- determination of pile foundation stiffness;
- ✓Basic configuration4
Basic configuration4
€2 000 EUR
Includes:
- graphical user interface;
- linear static analysis;
- dynamic analysis by eigenfrequencies expansion method (accelerogram, seismic by normative documents (38 modules) 1, harmonic, impulse, impact, wind pulsation, blast wave impact);
- calculation ofdesign combinations of forces (DCF)
- calculation of design combinations of loads (DCL)
- calculation of loads on fragment of the structure (FRAGMENT);
- strength of cross section test (LITERA);
- cross-section constructor (CSC);
- condensation of masses (mass redistribution into defined nodes of the design model);
- floor nodal reaction spectrums;
- editable rolled steel database;
- editable materials database (concrete, reinforcement, rolled steel, wood);
- documentation system;
- application programming interface(LiraAPI);
- Revit Structure ->LIRA 10-> Revit Structure;
- AutoCAD ->LIRA 10-> AutoCAD;
- Tekla Structure ->LIRA 10-> Tekla Structure;
- Advance Steel ->LIRA 10-> Advance Steel;
- Renga -> LIRA 10;
Application Utilities:
- seismogram by accelerogram;
- accelerogram by seismogram;
- unit converter;
- scientific calculator;
- interpolation of data;
- calculation of pile's stiffness;
- calculation of coefficients of subgrade reaction;
- wall thickness of glaze ice;
- local calculation of reinforced concrete bar;
- local calculation of reinforced concrete plate
- column's effective length;
- сalculation of steel deck;
- ✓Stability
Stability
€250 EUR
Includes:
- calculation of safety factors and buckling modes of the structure.
- ✓Design system of reinforced concrete structures (RCS)
Design system of reinforced concrete structures (RCS)
€600 EUR
Includes:
- checking and proportioning of reinforcement for RC elements;
- checking and proportioning of reinforcement for pipe-concrete elements;
- surface of bearing capacity;
- punching of reinforced concrete slabs.
- ✓Design system for steel structures (SS)
Design system for steel structures (SS)
€450 EUR
Includes:
- checking and proportioning of steel elementcross-sections;
- calculation logging;
- checking of timber element cross-sections.
- ✓Timber
Timber
€200 EUR
- ✓Soil
Soil
€800 EUR
Includes:
- determination of natural foundation stiffness;
- determination of pile foundation stiffness;
- ✓Physical and design nonlinearity
Physical and design nonlinearity
€600 EUR
- ✓Geometrical nonlinearity
Geometrical nonlinearity
€600 EUR
- ✓Assemblage
Assemblage
€500 EUR
Includes:
- linear;
- nonlinear(elements of physical, structural and geometric nonlinearity);
- direct dynamic analysis2 of the assembled structure;
- ✓Variation of models
Variation of models
€300 EUR
Includes:
- unification of DCF problem package;
- formation of DCF and DCL by downloads of problem package;
- ✓Basic configuration4
Basic configuration4
€2 000 EUR
Includes:
- graphical user interface;
- linear static analysis;
- dynamic analysis by eigenfrequencies expansion method (accelerogram, seismic by normative documents (38 modules) 1, harmonic, impulse, impact, wind pulsation, blast wave impact);
- calculation ofdesign combinations of forces (DCF)
- calculation of design combinations of loads (DCL)
- calculation of loads on fragment of the structure (FRAGMENT);
- strength of cross section test (LITERA);
- cross-section constructor (CSC);
- condensation of masses (mass redistribution into defined nodes of the design model);
- floor nodal reaction spectrums;
- editable rolled steel database;
- editable materials database (concrete, reinforcement, rolled steel, wood);
- documentation system;
- application programming interface(LiraAPI);
- Revit Structure ->LIRA 10-> Revit Structure;
- AutoCAD ->LIRA 10-> AutoCAD;
- Tekla Structure ->LIRA 10-> Tekla Structure;
- Advance Steel ->LIRA 10-> Advance Steel;
- Renga -> LIRA 10;
Application Utilities:
- seismogram by accelerogram;
- accelerogram by seismogram;
- unit converter;
- scientific calculator;
- interpolation of data;
- calculation of pile's stiffness;
- calculation of coefficients of subgrade reaction;
- wall thickness of glaze ice;
- local calculation of reinforced concrete bar;
- local calculation of reinforced concrete plate
- column's effective length;
- сalculation of steel deck;
- ✓Stability
Stability
€250 EUR
Includes:
- calculation of safety factors and buckling modes of the structure.
- ✓Design system of reinforced concrete structures (RCS)
Design system of reinforced concrete structures (RCS)
€600 EUR
Includes:
- checking and proportioning of reinforcement for RC elements;
- checking and proportioning of reinforcement for pipe-concrete elements;
- surface of bearing capacity;
- punching of reinforced concrete slabs.
- ✓Design system for steel structures (SS)
Design system for steel structures (SS)
€450 EUR
Includes:
- checking and proportioning of steel elementcross-sections;
- calculation logging;
- checking of timber element cross-sections.
- ✓Timber
Timber
€200 EUR
- ✓Soil
Soil
€800 EUR
Includes:
- determination of natural foundation stiffness;
- determination of pile foundation stiffness;
- ✓Physical and design nonlinearity
Physical and design nonlinearity
€600 EUR
- ✓Geometrical nonlinearity
Geometrical nonlinearity
€600 EUR
- ✓Assemblage
Assemblage
€500 EUR
Includes:
- linear;
- nonlinear(elements of physical, structural and geometric nonlinearity);
- direct dynamic analysis2 of the assembled structure;
- ✓Variation of models
Variation of models
€300 EUR
Includes:
- unification of DCF problem package;
- formation of DCF and DCL by downloads of problem package;
- ✓Direct dynamic analysis (Dynamics+)
Direct dynamic analysis (Dynamics+)
€500 EUR
for action of accelerograms, seismograms and other dynamic loads for problems:
- linear;
- physically and structurally nonlinear problems
- geometrically nonlinear problems.
- ✓Bridge
Bridge
€400 EUR
Includes:
- influence surfaces;
- rolling bythe axes of the wheels;
- calculation of multistage schemes;
- ✓PushoverAnalysis (nonlinear quasi-static analysis of dynamic problems)3
PushoverAnalysis (nonlinear quasi-static analysis of dynamic problems)3
€400 EUR
Includes:
- by single-component accelerogram;
- DBN V.1.1-12:2014;
- STO NIU MGSU 2015;
- EN 1998-1:2004;
- ✓Thermal conductivity
Thermal conductivity
€400 EUR
Includes:
- stationary and non-stationary2 thermal conductivity problems (calculation of temperature distribution across structure);
- considering of the obtained temperature field in the stress-strain state;
- ✓Cross section calculation
Cross section calculation
€400 EUR
Includes:
- determination of elastic and geometric properties, plastic, torsion, shear, mass-inertial and stiffness characteristics.
- ✓Filtration3
Filtration3
€200 EUR
Includes:
- filtration modeling in water-saturated soil with calculation of distribution of fluid velocity and pressure;
- depression curve construction;
- considering of the obtained pore pressure in stress-strain state;
1 Implemented standards: EN 1990, EN 1992-1-1, EN 1993-1-1, EN 1995-1-1, EN 1998-1, AISC 360-16-2019, ASCE/SEI 7-22, DBN V.1.2-2:2006, DSTU B V.2.6-156-2010, DBN V.2.6-198:2014, SNiP 2.01.07-85*, SNiP 2.03.01-84*, SNiP II-23-81*, KMK 2.01.03-96, TGN 2.01.08-2020, AzDTN 2.3-1-2010, SI 413 and others.
2 Upon the availability of Dynamics+ module
3 Upon the availability of Physical nonlinearity module
4 Upon purchase of separate systems highlighted item is mandatory
5 Additional modules are not added to the MINI configuration
Cost when purchasing several licenses
Table 2
Number of simultaneously acquired licenses
MINI
BASE
PROFF
FULL
2 licenses (20% discount from cost)
1 200
3 440
5 040
6 880
3 licenses (30% discount from cost)
1 050
3 010
4 410
6 020
From 4 licenses and more
By agreement
Cost of upgrade from previous versions
Table 3
Version / Configuration
MINI
BASE
PROFF
FULL
Custom optional configuration
LIRA 10.14
150
430
630
860
10%
LIRA 10.10 - 10.12
300
860
1 260
1 720
20%
LIRA 10.x - 10.8
600
1 720
2 520
3 440
40%
Special offers
Table 4
Configuration name
BASE
PROFF
FULL
Unlimited license
4 300
6 300
8 600
Annual license
1 505
2 205
3 010
30-day license
360
525
720
LIRA 10.16 FULL for IHE
cooperation agreement
Send Query
* - required field
